Edgar Alejandro Marañon Leon

Home / Professors / Profesores / Edgar Alejandro Marañon Leon
Edgar Alejandro Marañon Leon

Edgar Alejandro Marañon Leon

Doctor Of Philosophy

emaranon @uniandes.edu.co

Profesor Asociado

Office: ML-623

Extension: 2917

Profile
Courses
Products
Degrees
Projects

Profile

Recent Courses

  • 2026
    • MECÁNICA DE MATERIALES

      First period
      Bachelor Level

      PROYECTO 4

      First period
      Bachelor Level

Recent Products

Ayala-Garcia, C., Rodriguez J, Perez C, Forero C, De Francisco Vela, S, Parra-Agudelo Leonardo, Maranon A, Hernandez C, Alvarez O, Porras A. (2025)
Community Knowledge in Action: Participatory Design for the Transformation of the Cashew Value Chain in the Vichada Region, Colombia
Intersections Interdisciplinary Research on Architecture, Design, City and Territory (ISBN 978-3-031-76401-1)
Inbook
Maranon A. (2025)
Correlating Quasi-static Punch Shear Test Results with the Multi-hit Impact Resistance of Transparent Armor Systems
Inproceeding

Recent Degrees

Doctor Of Philosophy

Doctoral degree

Loughborough University

2005

Gran Bretaña

Magíster En Ingeniería Mecánica

Master degree

Universidad De Los Andes, Colombia

1996

Colombia

Recent Projects

  • 2017
    • Alimentos Con-Ciencia: Modelo sostenible de creación y diálogos inter y transdisciplinarios en torno a la producción de alimentos

      Duration: 38 months

      PR.1.2017.8127

      El proyecto Alimentos Con-Ciencia: Modelo sostenible de creación y diálogos inter y transdisciplinarios en torno a la producción de alimentos fue presentado y promovido por la Vicerrectoría de Investigación y creación para la financiación de proyectos interdisciplinarios en el 2017. El proyecto fue uno de los redireccionamientos que tuvo el trabajo adelantado por equipo de investigadores de la Universidad de los Andes, quienes participaron en el desarrollo de la propuesta que se adelantó en la Convocatoria Colombia Científica. Alimentos Con-Ciencia es un proyecto con énfasis en la creación-investigación, que busca ampliar y optimizar espacios de diálogo y de construcción colectiva alrededor de un tema de interés global, como lo son, los alimentos.A través del estudio, diseño e implementación de sistemas acuapónicos urbanos (acuicultura e hidroponía) como laboratorios agrícolas distribuidos en espacios universitarios (AgroLab), la propuesta ha demandado no sólo actos de colaboración, sino actos de creación que faciliten el desarrollo de nuevas ideas, innovadoras en los campos respectivos de trabajo inter/transdisciplinar como generador de nuevo conocimiento y significados en relación a problemas de acceso, disponibilidad, estabilidad y utilización de los alimentos vinculados a la seguridad alimentaria.Para Dobers, 2017, es claro que no existen metodologías de trabajo en conjunto que maximicen las oportunidades de colaboración y cocreación exitosas y que sean transversales a varias disciplinas en un ejercicio de experimentación, exploración y descubrimiento, en favor de la sostenibilidad futura de los sistemas agrícolas y su relación con la sociedad, la naturaleza y el paisaje, por lo tanto, este proyecto se convirtió en reto para varias disciplinas.Unidades involucradas (facultades y departamentos)Investigador principalFreddy Zapata Vanegas, Profesor Asociado.Facultad de Arquitectura y Diseño, Departamento de Diseño. Co-investigador_sFacultad de Arquitectura y Diseño. Departamento de Diseño.Maria de los Ángeles González y Samira Kadamani,  profesoras asociadasAmparo Quijano y Leonardo Parra, profesor_s asistentes. Facultad de Ingeniería.Johann Osma, profesor asociado, ingeniería eléctrica y electrónica Pablo Figueroa, profesor asociado, ingeniería de sistemas y computaciónAlejandro Marañón, profesor asociado, ingeniería mecánicaFacultad de MedicinaVeronica Akle, profesora asistente.Yeferzon Ardila, profesional asistente.Resultados esperadosEl proyecto tiene previsto los siguientes resultados:Ocho (8) talleres (cumplidos)Un (1) seminario (en proceso)Un (1) evento (en proceso)Dos (2) artículos no indexados (cumplido)Un (1) artículo indexado (en proceso)Tres (3) modelos de prueba (cumplido)Un (1) prototipo (cumplido)Un (1) registro de PI (pendiente)

  • 2012
    • DESARROLLO DEL PROYECTO INVESTIGACION

      Duration: 24 months

      PRY-609

Courses

  • 2026
    • MECÁNICA DE MATERIALES

      First period
      Bachelor Level

      PROYECTO 4

      First period
      Bachelor Level
    • TESIS DOCTORAL

      First period
      Doctoral Level

      PROY. DESARR. PROFESIONAL IMEC

      First period
      Bachelor Level
  • 2025
    • DISEÑO Y DES DE PRODUCTOS SOST

      First period
      Master Level

      PROYECTO 4

      First period
      Bachelor Level
    • PROYECTO 4

      Second period
      Bachelor Level

      DISEÑO Y DESAR PRODUC SOSTENI

      First period
      Master Level
    • MECÁNICA DE MATERIALES

      Second period
      Bachelor Level

      TESIS DOCTORAL

      Second period
      Doctoral Level
    • PROYECTO INDIVIDUAL

      Second period
      Bachelor Level

      DISEÑO Y DESARR. PROD. SOSTENI

      First period
      Master Level
    • PROYECTO INDIVIDUAL

      First period
      Bachelor Level

      TESIS DOCTORAL 4

      First period
      Doctoral Level
    • MECÁNICA DE MATERIALES

      First period
      Bachelor Level
  • 2024
    • MECÁNICA DE MATERIALES

      First period
      Bachelor Level

      MECÁNICA DE MATERIALES

      Second period
      Bachelor Level
    • MECANICA DE SOLIDOS AVANZADA

      First period
      Master Level

      PROYECTO 4

      First period
      Bachelor Level
    • PROYECTO INDIVIDUAL

      Second period
      Bachelor Level

      PROYECTO INDIVIDUAL

      First period
      Bachelor Level
    • PROYECTO 4

      Second period
      Bachelor Level
  • 2023
    • PROYECTO INDIVIDUAL

      First period
      Bachelor Level

      MECANICA DE SOLIDOS AVANZADA

      First period
      Master Level
    • PROYECTO 3

      First period
      Bachelor Level

      MECÁNICA DE MATERIALES

      Second period
      Bachelor Level
    • PROYECTO 4

      Second period
      Bachelor Level

      PROYECTO INDIVIDUAL

      Second period
      Bachelor Level
  • 2022
    • MECANICA DE SOLIDOS AVANZADA

      First period
      Master Level

      PROYECTO INDIVIDUAL

      First period
      Bachelor Level
    • MECÁNICA DE MATERIALES

      First period
      Bachelor Level

      MECÁNICA DE MATERIALES

      Second period
      Bachelor Level
    • PROYECTO INTERMEDIO

      First period
      Bachelor Level

      PROYECTO INTERMEDIO

      Second period
      Bachelor Level
    • PROYECTO INDIVIDUAL

      Second period
      Bachelor Level
  • 2021
    • MECÁNICA SÓLIDOS DEFORMABLES

      First period
      Bachelor Level

      PROYECTO GRADO

      First period
      Bachelor Level
    • PROYECTO INTERMEDIO

      Second period
      Bachelor Level

      MECÁNICA DE MATERIALES

      Second period
      Bachelor Level
    • INTEGRIDAD ESTRUCTURAL

      Second period
      Master Level

      PROYECTO INDIVIDUAL

      Second period
      Bachelor Level
  • 2020
    • PROYECTO GRADO

      First period
      Bachelor Level

      MECÁNICA DE SÓLIDOS AVANZADA

      First period
      Master Level
    • MECÁNICA SÓLIDOS DEFORMABLES

      First period
      Bachelor Level

      PROYECTO INTERMEDIO

      Second period
      Bachelor Level
    • PROYECTO INTERMEDIO

      First period
      Bachelor Level

      MECÁNICA SÓLIDOS DEFORMABLES

      Second period
      Bachelor Level
    • PROYECTO GRADO

      Second period
      Bachelor Level

      MECÁNICA DE SÓLIDOS RIGIDOS

      Second period
      Bachelor Level
  • 2019
    • LABORATORIO MEC. SÓL. DEFORMAB

      First period
      Bachelor Level

      PROYECTO GRADO

      Second period
      Bachelor Level
    • CREATIVIDAD E INNOVACIÓN

      Second period
      Bachelor Level

      PROYECTO INTERMEDIO

      First period
      Bachelor Level
    • SEM. DE MAGISTER

      First period
      Master Level

      COMPL. PROYECTO INTERMEDIO

      First period
      Bachelor Level
    • ESTUDIO MAESTRÍA

      First period
      Master Level

      MECANICA DE SOLIDOS RIGIDOS

      Interseminal period
      Bachelor Level
    • MECÁNICA SÓLIDOS DEFORMABLES

      Second period
      Bachelor Level

      ESTUDIO 6: PROD INDUSTRIAL

      First period
      Bachelor Level
    • MECÁNICA SÓLIDOS DEFORMABLES

      First period
      Bachelor Level

      PROYECTO GRADO

      First period
      Bachelor Level
    • SEMINARIO DE DOCTORADO

      First period
      Doctoral Level
  • 2018
    • MECÁNICA SÓLIDOS DEFORMABLES

      First period
      Bachelor Level

      MECÁNICA MATERIALES COMPUESTOS

      First period
      Master Level
    • LABORATORIO MEC. SÓL. DEFORMAB

      Second period
      Bachelor Level

      PROYECTO INTERMEDIO

      First period
      Bachelor Level
    • LABORATORIO MEC. SÓL. DEFORMAB

      First period
      Bachelor Level

      MECÁNICA SÓLIDOS DEFORMABLES

      Second period
      Bachelor Level
    • SEM. DE MAGISTER

      Second period
      Master Level

      SEMINARIO DE DOCTORADO

      Second period
      Doctoral Level
    • ESTUDIO 6: PROD INDUSTRIAL

      Second period
      Bachelor Level

      ESTUDIO MAESTRÍA

      Second period
      Master Level
  • 2017
    • LABORATORIO MEC. SÓL. DEFORMAB

      First period
      Bachelor Level

      LABORATORIO MEC. SÓL. DEFORMAB

      Second period
      Bachelor Level
    • MECANICA DE SOLIDOS RIGIDOS

      First period
      Bachelor Level

      LABORATORIO MEC SOL RIGIDOS

      First period
      Bachelor Level
    • MECÁNICA SÓLIDOS DEFORMABLES

      First period
      Bachelor Level

      ANALISIS METODO DE ELEM FINI

      First period
      Master Level
    • MECÁNICA SÓLIDOS DEFORMABLES

      Second period
      Bachelor Level
  • 2016
    • PROYECTO INTERMEDIO

      First period
      Bachelor Level

      TUTORIAL 1

      First period
      Doctoral Level
    • MECANICA DE MEDIOS CONTINUOS

      Second period
      Master Level

      MECANICA DE SOLIDOS RIGIDOS

      Second period
      Bachelor Level
    • PROYECTO INTERMEDIO

      Second period
      Bachelor Level

      LABORATORIO MEC. SÓL. DEFORMAB

      First period
      Bachelor Level
    • MECÁNICA SÓLIDOS DEFORMABLES

      Second period
      Bachelor Level

      LABORATORIO MEC. SÓL. DEFORMAB

      Second period
      Bachelor Level
    • MECANICA DE SOLIDOS AVANZADA

      First period
      Master Level

      TUTORIAL 1

      Second period
      Doctoral Level
    • LABORATORIO MEC SOL RIGIDOS

      Second period
      Bachelor Level

      SEMINARIO GIE

      Second period
      Bachelor Level
    • MECÁNICA SÓLIDOS DEFORMABLES

      First period
      Bachelor Level

      MATERIALES COMPUESTOS

      First period
      Master Level

Products

Ayala-Garcia, C., Rodriguez J, Perez C, Forero C, De Francisco Vela, S, Parra-Agudelo Leonardo, Maranon A, Hernandez C, Alvarez O, Porras A. (2025)
Community Knowledge in Action: Participatory Design for the Transformation of the Cashew Value Chain in the Vichada Region, Colombia
Intersections Interdisciplinary Research on Architecture, Design, City and Territory (ISBN 978-3-031-76401-1)
Inbook
Maranon A. (2025)
Correlating Quasi-static Punch Shear Test Results with the Multi-hit Impact Resistance of Transparent Armor Systems
Inproceeding
Porras A, Michaud V, Maranon A, Hernandez C, Morales MA, Porras J. (2025)
Development of a Sustainable Thermoplastic Composite Material Using Manicaria saccifera Fabric and Elium® Resin
Journal of Natural Fibers (ISSN 15440478)
Article
.(2025).
Diseño y fabricación de la atracción mecánica “Energía Humana para el Agua”
Thesis
Morales MA, Porras J, Casas J, Maranon A, Hernandez C., Michaud V, Porras A. (2025)
Effect of Polypropylene‐Grafted‐Maleic Anhydride and Rice Husk Particle Size on 3D‐Printing Filament Composites From Recycled Polypropylene
Polymer Composites (ISSN 0272-8397)
Article
Ayala-Garcia, C., Forero C, De Francisco Vela, S, Maranon A, Hernandez C. (2025)
Jurui, Marañón mas allá de su nuez y su cascara: Tejiendo relaciones con la materia las personas, el lugar y la cultura.
INMATERIAL. Diseño, Arte y Sociedad. (ISSN 2462-5892)
Article
Ayala-Garcia, C., Perez C, Forero C, Rodriguez J, De Francisco Vela, S, Parra-Agudelo Leonardo, Cruz T, Porras J, Maranon A, Hernandez C, Alvarez O, Porras A. (2025)
Multidisciplinary Approach for the Development of Materials from the Byproduct of the Opening of the Cashew Nut in Vichada
Intersections Interdisciplinary Research on Architecture, Design, City and Territory (ISBN 978-3-031-76401-1)
Inbook
.(2025).
Rediseño de un extractor solar de líquido de coraza de marañón
Thesis
.(2025).
Silla escolar para jardín infantil: Aplicando la ergonomía en el diseño generativo
Thesis
León J, Ortiz G, Gonzalez A, Alvarez O, Maranon A, Hernandez C., Ayala-Garcia, C., Porras A. (2025)
Understanding the effects of pre-treatment and extraction methods on lipid fingerprint of cashew nut shell liquid (CNSL) by non-targeted lipidomics analysis
SCIENTIFIC REPORTS (ISSN 2045-2322)
Article
Cruz T, Porras J, Alvarez O, Ayala-Garcia, C., Hernandez C., Maranon A, Porras A. (2024)
A natural fiber composite from Cashew nutshell (Anacardium occidentale L.) and polypropylene. 4th International Conference on Materials Science & Engineering organized by United Scientific Group (USG). 2024.
Inproceeding
Bautista A, Maranon A, Casas J, Pavolini E. (2024)
An Attempt to Predict Transparent Armor Ballistic Performance through Quasi‑Static Punch Shear Test
EXPERIMENTAL MECHANICS (ISSN 17412765)
Article
.(2024).
Aprovechamiento de escoria siderúrgica en eco-ladrillos cerámicos
Thesis
.(2024).
Desarrollo de un extractor solar de líquido de coraza de marañón: Diseñar, Construir, Probar y Aprender
Thesis
.(2024).
Development of 58-Tooth chainring for time trial stages
Thesis
.(2024).
Diseño de una red neuronal para predecir el comportamiento de un vidrio blindado frente al multimpacto balístico
Thesis
.(2024).
Diseño de una silla escolar para impresión 3D de gran formato con ayuda de herramientas generativas
Thesis
Cruz T, Maranon A, Hernandez C, Alvarez O, Ayala-Garcia, C., Porras A. (2024)
Exploring the Potential of Cashew Nutshells: A Critical Review of Alternative Applications
BIORESOURCES (ISSN 1930-2126)
Article
Ayala-Garcia, C., Alvarez O, Maranon A, Porras A, Hernandez C. (2024)
Influence of cashew nut shell liquid on corrosion and tribocorrosion behavior of metallic alloys
wear (ISSN 0043-1648)
Article
.(2024).
Metrología automatizada: Caracterización de elementos mecánicos con visión artificial y redes neuronales
Thesis
.(2024).
Modelo computacional basado en elementos finitos de un horno de fundición de arco eléctrico
Thesis
Ayala-Garcia, C., Alvarez O, Maranon A, Porras A. (2024)
Physical, morphological, and mechanical properties of raw and steamed cashew nuts (Anacardium occidentale L.
International Journal of Food Properties (ISSN 1094-2912)
Article
.(2024).
Quasi-static punch shear test: a methodology for correlating the ballistic behaviour of transparent armor systems
Thesis
Ortiz G, León J, Hernandez C, Ayala-Garcia, C., Maranon A, Gonzalez A, Alvarez O, Porras A.(2024).
Synthesis of cardanol derived from cashew nut shell liquid and utilization as an epoxy resin plasticizer
Event
León J, Alvarez O, Porras A, Gonzalez A, Ayala-Garcia, C., Maranon A, Hernandez C..
Synthesis of cardanol derived from cashew nut shell liquid and utilization as an epoxy resin plasticizer.
Other
Casas J, Calle J, Robinson V, Maranon A. (2023)
13 - Cellular sandwich composites under blast loads
Dynamic Deformation, Damage and Fracture in Composite Materials and Structures (Second Edition) (ISBN 9780128239797)
Inbook
Hernandez C, Maranon A. (2023)
An Inverse Method to Estimate Cowper-Symonds Material Model Parameters from a Single Split Hopkinson Pressure Bar Test
Journal of Dynamic Behavior of Materials (ISSN 2199-7446)
Article
Porras A, Maranon A, Porras J, Alvarez O, Cruz T.(2023).
Análisis de descomposición de los materiales usados en empaques en la cadena de producción del marañón en el Departamento del Vichada. EIEI ACOFI 2023 ingeniería para transformar territorios. 19 -22 septiembre 2023
Event
Perez C, Ayala-Garcia, C., Forero C, Rodriguez J, Cruz T, Porras J, De Francisco Vela, S, Parra-Agudelo Leonardo, Maranon A, Hernandez C, Porras A, Alvarez O. (2023)
Aproximación Multidisciplinar para el desarrollo de materiales a partir del residuo de apertura de la nuez del marañon en el Vichada
Intersecciones 2023. IV Congreso Interdisciplinario de Investigación en Arquitectura, Diseño, Ciudad y Territorio. Entre escalas, agencias y territorios en Latinoamérica (ISBN 9789561432468)
Inbook
.(2023).
Caracterización de daños sub-superficiales en materiales compuestos de fibra de carbono epoxi mediante redes neuronales
Thesis
Morales MA, Maranon A, Porras A. (2023)
Colombian Sustainability Perspective on Fused Deposition Modeling Technology: Opportunity to Develop Recycled and Biobased 3D Printing Filaments
Polymers (ISSN 2073-4360)
Article
Alvarez O, Porras A, Maranon A, Parra-Agudelo Leonardo, De Francisco Vela, S, Perez C, Ayala-Garcia, C., Rodriguez J, Forero C.(2023).
Conocimiento comunitario en acción: Diseño participativo para la transformación de la cadena de valor del marañen en la región del Vichada, Colombia.IV Congreso de Investigación de Arquitectura, Diseño, Ciudad y Territorio: Intersecciones 2023. 26 - 28 Abril. Santiago de Chile.
Event
Forero C, Rodriguez J, Ayala-Garcia, C., Perez C, De Francisco Vela, S, Parra-Agudelo Leonardo, Maranon A, Hernandez C, Alvarez O, Porras A. (2023)
Conocimiento comunitario en acción: Diseño participativo para la transformación de la cadena de valor del marañon en la región del Vichada, Colombia
Intersecciones 2023. IV Congreso Interdisciplinario de Investigación en Arquitectura, Diseño, Ciudad y Territorio. Entre escalas, agencias y territorios en Latinoamérica (ISBN 9789561432468)
Inbook
.(2023).
Development and evaluation of a recyclable composite material from acrylic thermoplastic resin and Manicaria saccifera fabric
Thesis
Morales MA, Porras A, Maranon A, Hernandez C..(2023).
Effect of MAPP and talc on recycled polypropylene and rice husk biocomposites for 3D printing. "ICNF2023: 6th International Conference on Natural Fibers. Nature Inspired Sustainable Solutions". Funchal, Madeira, Portugal. June 2023.
Event
Porras A, Maranon A, Garcia A, Morales MA, Hernandez C.(2023).
Effect of maleic anhydride compatibilizer on the mechanical and thermal performance of 3D printing filaments based on PLA and rise husk. 6th International Conference on Natural Fibers INCF2023
Event
Porras A, Porras J, Maranon A, Morales MA, Michaud V, Hernandez C.(2023).
Evaluation of post-consumer recycled polypropylene-based composite materials reinforced with rice husk fibers. Twenty-Third International Conference on Composite Materials (ICCM23)
Event
Porras A, Ayala-Garcia, C., Maranon A, León J, Alvarez O, Gonzalez A.(2023).
Impact of extraction and pre-treatment methods over physicochemical properties of cashew nut-shell liquid. 27th Annual Green Chemistry & Engineering Conference
Event
.(2023).
Impacto en materiales compuestos traslúcidos: Un modelo computacional de masas concentradas
Thesis
Porras A, Ayala-Garcia, C., Alvarez O, Maranon A.(2023).
Influence of cashew nutshell liquid in the metallic alloys corrosion behavior. European Corrosion Congress EUROCORR. 27-31 Agust 2023
Event
Porras A, Gonzalez A, Alvarez O, Maranon A, León J.(2023).
Metodologias de extracción de aceite de coraza de marañon: evalación de impacto ambiental por emisiones de CO2. EIEI ACOFI 2023 ingeniería para transformar territorios. 19 -22 septiembre 2023
Event
Porras A, Alvarez O, Maranon A, Ayala-Garcia, C..
Máquina de Ensayos de Inmersión Alterna
INDUSTRIAL_DESIGN
Porras A, Cruz T, Alvarez O, Porras J, Maranon A, Ayala-Garcia, C., Casas J, Hernandez C.(2023).
Physical and thermal characterization of cashew nut shells (Anacardium Occidentales L.) from Vichada Department in Colombia. 6th International Conference on Natural Fibers INCF2023
Event
.(2023).
The use of deep reinforcement learning for aiding in the solution of mechanical engineering problems
Thesis
Porras A, León J, Maranon A, Alvarez O, Gonzalez A.(2022).
Extracción de aceite de la coraza del marañón del Departamento del Vichada. 3er Congreso de Ambiente, Ciencia y Territorio Vichada 2022. 29 -30 Noviembre 2022.
Event
Porras A, Maranon A.(2022).
1er Congreso de Investigación Circular Week SENA. Retos para el desarrollo bioeconómico
Event
.(2022).
Análisis de protección de cascos de bicicleta para adultos en impactos lineales por medio del método de elementos finitos.
Thesis
.(2022).
Análisis del efecto producido por la temperatura en ensayos de punzonamiento cuasi-estáticos en materiales compuestos traslúcidos
Thesis
.(2022).
Caracterización de vidrio soda lime en confinamiento
Thesis
Porras A, Porras J, Morales MA, Maranon A.(2022).
Characterization of novel sustainable composite materials based on Elium 188O resin reinforced with a colombian natural fiber. 20 Th European Conference on Composite Materials. ECCM20. 26th - 30 Th June 2022. Lausanne. Switzerland.
Event
.(2022).
Determinación de los parámetros constitutivos de la Plastilina Roma No.1
Thesis
.(2022).
Development of low-cost solar cooker for night usage in cold andian region weather
Thesis
.(2022).
Diseño y manufactura de plataforma UAV para la detección y localización de objetos metálicos enterrados a baja profundidad
Thesis
Garcia A, Maranon A, Muñoz-Camargo, Cruz J, Porras A.(2022).
Fiber-Based Bioactive Functionalization Of Porous Bio Composites: Insightsfromcocoabean Shell. TISSUE ENGINEERING PART A 28, S554-S554 Incorporation Into Mineralized Poly (Lactic Acid).
Event
Porras A, Morales MA, Maranon A.(2022).
POLYMERS 2020 New Trends in Polymer Science: Health of the Planet, Health of the People.
Event
Porras A, Garcia A, Maranon A, Hernandez C, Muñoz-Camargo.(2022).
Performance of 3D printed Polylactic Acid and Cocoa Bean Sheilla based bone scaffolds. POLYMERS2020 New Trends in Polymer Science: Health of the Planet, Health of the People
Event
Porras A, Maranon A.(2022).
Procesos de co-creación en territorio para planteamiento de potenciales aplicaciones de aprovechamiento de la coraza de la nuez de marañón. 3er Congreso de Ambiente, Ciencia y Territorio Vichada 2022
Event
.(2022).
Vehículo de reconocimiento de espacios por inspección remota
Thesis
Porras A, Morales MA, Maranon A.(2022).
ustainable 3D printing filaments based on recycled polypropylene and rice husk: Effects of fiber particle size and maleic anhydride-grafites-polypropylene implementation. POLYMERS2020 New Trends in Polymer Science: Health of the Planet, Health of the People.
Event
Porras A, Morales MA, Maranon A.(2021).
"ICNF2021 - 5th International Conference on Natural Fibers - Materials of the Future Portugal 17 -19 de mayo 2021"DEVELOPMENT AND CHARACTERIZATION OF A 3D PRINTED COCOA BEAN SHELL AND RECYCLED POLYPROPYLENE SUSTAINABLE COMPOSITE
Event
Garcia A, Porras A, Maranon A.(2021).
6th World Congress of the Tissue Engineering and Regenerative Medicine International Society
Event
.(2021).
Analysis of material's heterogeneity and damage mechanics produced by a ballistic impact over the transparent armor system's areal density and thickness
Thesis
Hernandez C, Buchely M, Casas J, Maranon A. (2021)
Behavior of oil-based modeling clay at medium strain rates
Journal of Defense Modeling and Simulation (ISSN 1548-5129)
Article
Garcia A, Hozman A, Ramirez A, Cruz L, Maranon A, Muñoz-Camargo, Cruz J, Porras A. (2021)
Bioactive Poly(lactic acid)–Cocoa Bean Shell Composites for Biomaterial Formulation: Preparation and Preliminary In Vitro Characterization
Polymers (ISSN 2073-4360)
Article
Morales MA, Reyes L.H., Porras A, Maranon A.
COMPOSITE MATERIALS FROM BREWERS' SPENT GRAIN FIBERS AND POLYLACTIC ACID: CHARACTERIZATION AND PROPERTIES.ICGDMMP 2021: XV. International Conference on Green Design, Materials and Manufacturing Processes NOVEMBER 18-19, 2021/
Other
.(2021).
Caracterización de daños producidos por indentación cuasi estática en vidrios blindados
Thesis
.(2021).
Caracterización de propiedades mecánicas del lulo (Solanum quitoense) a partir de prueba de impacto en caída libre
Thesis
.(2021).
Caracterización física y mecánica de la physalis peruviana
Thesis
Morales MA, Atencio C, Maranon A, Hernandez C, Michaud V, Porras A. (2021)
Development and Characterization of Rice Husk and Recycled Polypropylene Composite Filaments for 3D Printing
Polymers (ISSN 2073-4360)
Article
Morales MA, Porras A, Maranon A, Hernandez C. (2021)
Development and Characterization of a 3D Printed Cocoa Bean Shell Filled Recycled Polypropylene for Sustainable Composites
Polymers (ISSN 2073-4360)
Article
.(2021).
Diseño de un dispositivo de movilidad para el acceso de adultos mayores a Transmilenio
Thesis
.(2021).
Finite nodal neural analysis
Thesis
.(2021).
H2DM - hovercraft and 2D mapping design and manufacture of an hovercraft integrated with mapping capabilities through lidar system
Thesis
Garcia A, Maranon A, Muñoz-Camargo, Cruz J, Porras A.(2021).
Novel sustainable, bioactive and mineralized poly(Lactic acid)-cocoa bean shell composites: potential in bone filling applications
Event
.(2021).
Performance analysis of a low-cost solar cooker and improvement investigation using latent heat storage materials
Thesis
Porras A, Cruz J, Muñoz-Camargo, Maranon A, Garcia A. (2021)
Potential Bone Fillers Based on Composites of Cocoa Bean Shells and Poly(Lactic Acid): Compression Molding Manufacturing
CONFERENCE PROCEEDINGS: ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY. CONFERENCE (ISSN 1557-170X)
Article
Porras A, Maranon A, Garcia A.(2021).
Potential Bone Fillers Based on Composites of Cocoa Bean Shells and Poly(Lactic Acid): Compression Molding Manufacturing.
Event
Osorio J, Abolghasem S, Maranon A, Casas J. (2020)
Cutting parameters optimization of Al-6063-O using numerical simulations and Particle Swarm Optimization
International Journal of Advanced Manufacturing Technology (ISSN 0268-3768)
Article
Maranon A, Porras A. (2020)
Palm readings: Manicaria saccifera palm fibers are biocompatible textiles with low immunogenicity
Materials Science and Engineering: C (ISSN 0928-4931)
Article
Silva J, Maranon A, Casas J. (2020)
Post-yield mechanical properties of bovine trabecular bone – Relationships with bone volume fraction and strain rate
Engineering Fracture Mechanics (ISSN 0013-7944)
Article
Ayala-Garcia, C., Bigio D, Maranon A, Gomez R, Segura-Quijano Fredy, Benavides G.
Respirador Para Protección De Personal Médico En Tiempos De Covid 19- Persoco
Design Project
Buchely M, Maranon A. (2020)
Spherical Cavity Expansion Approach for the Study of Rigid-Penetrator’s Impact Problems
Applied Mechanics (ISSN 2673-3161)
Article
Kadamani S, Osorio H, Maranon A, Quijano O. (2019)
A Farm in Gigacity One
Other Publication
.(2019).
ANÁLISIS DE ASPECTOS DE PERCEPCIÓN DE CALIDAD EN TRANSMILENIO
Thesis
.(2019).
ATENUACIÓN DEL DAÑO EN EL MANGO TOMMY PRODUCIDO POR UN IMPACTO DE BAJA VELOCIDAD
Thesis
.(2019).
Análisis del beneficio económico por arbitraje en Colombia con Sistemas de Almacenamiento de Energía de tipo Baterías
Thesis
.(2019).
CARACTERIZACIÓN DE LA ENERGÍA DE ABSORCIÓN PARA LA FRUTA TROPICAL UCHUVA (PHYSALIS PERUVIANA L.) A PARTIR DE COMPRESIÓN E IMPACTO EN CAÍDA LIBRE
Thesis
.(2019).
CARACTERIZACIÓN DEL IMPACTO POR PROYECTIL DE ARMA NEUMÁTICA EN GEL BALÍSTICO
Thesis
.(2019).
CARACTERIZACIÓN DEL TEJIDO VEGETAL MANICARIA SACCIFERA PARA DETERMINAR LA VIABILIDAD DE USARSE COMO REFORZAMIENTO DE MATERIALES COMPUESTOS EN APLICACIONES CLÍNICAS
Thesis
.(2019).
Caracterización cuasi estática de las propiedades mecánicas de la gulupa colombiana (Passiflora edulis f. edulis).
Thesis
.(2019).
Cuerpos de guerra: narraciones corpo?reas de militares heridos en combate
Thesis
.(2019).
DESCRIPCION DE NANO COMPOSITES DE GRAFENO Y COLAGENO COMO SIMULANTE DE TRAUMA EN TEJIDOS ORGANICOS
Thesis
.(2019).
DISEÑO DE UN SISTEMA DE AHORRO DE AGUA Y ENERGÍA PARA BAÑOS
Thesis
.(2019).
Efecto de las divergencias del precedente de la Corte Constitucional y la Sala de Casación Laboral de la Corte Suprema de Justicia en los jueces de instancia. El caso de los Tribunales de Cundinamarca, Bogotá y Barranquilla.
Thesis
.(2019).
IMPLEMENTACIÓN DE TÉCNICAS DE MACHINE LEARNING PARA LA PREDICCIÓN DE VARIABLES METEOROLÓGICAS Y DEL SUELO QUE AFECTAN LA AGRICULTURA.
Thesis
.(2019).
IMPOSICIONES ECONÓMICAS Y ASISTENCIALISMO COMO MECANISMOS NEOCOLONIALES DEL DERECHO INTERNACIONAL
Thesis
.(2019).
Impactos de corto plazo de la Política "De Cero A Siempre" sobre las pautas de crianza en el hogar
Thesis
.(2019).
REDUCCIÓN DAÑO MECÁNICO POR TRANSPORTE TERRESTRE EN MANZANAS GRANNY SMITH.
Thesis
.(2019).
Sistema de Suspensión Para el Tren Delantero de una Bicicleta de Carga
Thesis
.(2019).
Sistema de votaciones con Blockchain
Thesis
Chaux J, Maranon A, Porras A. (2019)
Using Computed Tomography to Characterize Manicaria Saccifera Natural Fabric
ICNF 2019 - 4th International Conference on Natural Fibers
Inproceeding
Cruz L, Porras A, Maranon A, Salcedo F.
WORKSHOP SOBRE INGENIERÍA PARA LA INNOVACIÓN SOCIAL & EL ACCESO A PERSONAS EN CONDICIÓN DE DISCAPACIDAD
Event
.(2018).
CARACTERIZACIÓN DE UN COMPUESTO DE MATERIAL DE PLA Y LA FIBRA DE MANICARIA SACCIFERA FORMADO MEDIANTE MANUFACTURA ADITIVA A PARTIR DEL ENSAYO DE LA BARRA DE PRESIÓN DE HOPKINSON
Thesis
.(2018).
Cambio de orientación de fibras en paneles 9-10 mm de Mancaría y PLA, caracterización y comparación dinámica para viabilidad de reorientación.
Thesis
.(2018).
Comparative genomics of Phytophthora betacei and Phytophthora infestans reveals genome expansion due to extensive gene duplication but not repetitive elements in a novel species.
Thesis
.(2018).
Conflicto armado y sistema financiero: impacto del conflicto e iniciativas para la inclusión financiera en épocas de posconflicto
Thesis
.(2018).
DISEÑO Y DESARROLLO DE UN SISTEMA AEROPÓNICO COMO ALTERNATIVA PARA MEJORAR LA SEGURIDAD ALIMENTARIA
Thesis
.(2018).
Development and applications of SI + MMFS methods for intrinsic and scattering attenuation separation.
Thesis
.(2018).
Diseño y Configuración Óptima de un Sistema de Refrigeración por Absorción
Thesis
.(2018).
Diseño y manufactura de un sistema aeroponico
Thesis
.(2018).
ELABORACIÓN DE UN PROGRAMA INFANTIL DE DESARROLLO COLECTIVO PARA EVITAR EL ESCALAMIENTO DE CONFLICTOS SOCIALES
Thesis
.(2018).
EVALUACIÓN DE ESCENARIOS CONCEPTUALES DE EXPLOTACIÓN DE HIDROCARBUROS PARA EL DESARROLLO DEL CAMPO PINTO
Thesis
.(2018).
Effects of African Oil Palm Monocrops in the Role of Small Mammals within the Transmission Cycle of Trypanosoma cruzi
Thesis
.(2018).
Explorando el ambiente lumínico, una frontera entre las begonias de los bosques andinos.
Thesis
.(2018).
FRACTURE STRENGTH OF FIBERGLASS REINFORCED WITH ALUMINIUM IN CONTOURED DOUBLE-CANTILEVER BEAM
Thesis
Sopo J, Maranon A, Porras A, Hernandez C.
Impact response of a Manicaria Saccifera fabric reinforced PLA composite. "ICCST/12 - 12th International Conference on Composite Science and Technology Grand Hotel Vesuvio Sorrento, mayo 08--10 2019"
Other
Osorio J, Casas J, Maranon A, Abolghasem S. (2018)
Influence of Temperature on Ductile Damage Parameters and its Effects on FEM Orthogonal Cutting Simulations.
6 TO SIMPOSIO NACIONAL EN MECÁNICA DE MATERIALES Y ESTRUCTURAS CONTINUAS: EXPERIMENTACIÓN, MODELADO NUMÉRICO Y TEÓRICO (SMEC 2018)
Inproceeding
.(2018).
Liderazgo en educación Superior: una perspectiva desde la experiencia de docentes directivos en la Facultad de Ingeniería de la Universidad de los Andes
Thesis
.(2018).
Opus5-201820: Proyecto en San Fernando Occidental
Thesis
.(2018).
Petrography of the Doña Juana Volcanic Complex (DJVC) basement: implications in the Quaternary magmatism
Thesis
.(2018).
Problemas de Visibilidad en N^n
Thesis
Zapata F, Gonzalez M, Kadamani S, Parra-Agudelo Leonardo, Quijano O, Akle V, Ardila Y, Osma J, Figueroa P, Maranon A, Garavito J.
Serious play LEGO / Concepto acuapónicos. Taller relación forzada.
Design Project
Osorio J, Casas J, Maranon A, Abolghasem S, Porras A. (2018)
Strain-Rate and Temperature Effects in Ductile Damage and Element Removal Threshold and Its Influence in FEM Orthogonal Cutting Simulations
13th World Congress in Computational Mechanics
Inproceeding
Kadamani S, Gonzalez M, Zapata F, Parra-Agudelo Leonardo, Quijano O, Osma J, Akle V, Figueroa P, Maranon A, Ardila Y, Garavito J.
Taller de creación. Taller de diseño y propósitos.
Design Project
Kadamani S, Gonzalez M, Zapata F, Parra-Agudelo Leonardo, Quijano O, Osma J, Akle V, Figueroa P, Maranon A, Ardila Y, Garavito J.
Taller deriva. Taller de diseño y propósitos
Design Project
.(2017).
CARACTERIZACIÓN DEL ESTADO DE DEFORMACIONES DEL COMPUESTO OBTENIDO DE LA FIBRA DE LA PALMA MANICARIA SACCIFERA Y PLA CON UN CONCENTRADOR DE ESFUERZOS, MEDIANTE LA TÉCNICA DE CORRELACIÓN DE IMÁGENES DIGITALES
Thesis
.(2017).
CARACTERIZACIÓN DIMENSIONAL DE UN BIO-COMPUESTO FORMADO DE ÁCIDO POLILÁCTICO Y FIBRAS DE MANICARIA SACCIFERA POR MEDIO DE UN PROCESO DE TERMOFORMADO
Thesis
.(2017).
Caracterización del comportamiento dinámico del material compuesto de PLA y fibra corta de Manicaria Saccifera utilizando el ensayo de la barra dividida de Hopkinson (SHPB)
Thesis
.(2017).
Caracterización mecánica de láminas de material compuesto a base de fibras naturales de manicaria saccifera y ácido poli-láctico
Thesis
Hernandez C, Maranon A. (2017)
Determination of constitutive parameters from a Taylor test using inverse analysis
Strain ()
Article
.(2017).
Resilience Optimization of Systems of Interdependent Networks
Thesis
Quintero S, Porras A, Maranon A. (2017)
The Response of Manicaria saccifera Natural Fabric Reinforced PLA Composites to Impact by Fragment Simulating Projectiles
Advances in Natural Fibre Composites  (ISBN 978-3-319-64640-4)
Inbook
.(2017).
VALIDACION DE UN MODELO DE ELEMENTOS FINITOS PARA REPRESENTAR EL ENSAYO DE LA BARRA DIVIDIDA DE HOPKINSON (SHPB)
Thesis
Vasquez G .(2016).
A STUDY OF THE ELASTIC RECOVERY OF MANICARIA SACCIFERA/ PLA COMPOSITE AFTER ENDURING A RADIAL BENDING CONFORMATION PROCESS
Thesis
.(2016).
Analysis of the geomorphological change in Tesoro Island and its benthic community
Thesis
Quiroga J .(2016).
Análisis Experimental de la Resistencia a la Penetración por Cuchillo del KEVLAR Posterior a Tratamiento con STF
Thesis
Quintero S .(2016).
Ballistic characterization of Manicaria Saccifera reinforced poly (lactic acid) composite with 0.22 caliber FSP
Thesis
Sanchez D .(2016).
CARACTERIZACIÓN DEL COMPORTAMIENTO MECÁNICO DE PANELES DE KEVLAR REFORZADO CON STF FRENTE A ATAQUES CON ARMAS CORTO PUNZANTES
Thesis
Malagon J .(2016).
COMPORTAMIENTO MECANICO DE PANELES FABRICADOS CON KEVLAR Y STF FRENTE A IMPACTO DE FRAGMENTOS MODIFICADOS
Thesis
Bravo C .(2016).
Caracterización dinámica del PLA y su compuesto con fibra de Manicaria saccifera bajo ensayos de Taylor y Split-Hopkinson
Thesis
Bravo C .(2016).
Caracterización dinámica del PLA y su compuesto con fibra de Manicaria saccifera bajo ensayos de Taylor y Split-Hopkinson
Thesis
Guerrero P .(2016).
Caracterización mecánica del Kevlar con recubrimiento de STF bajo el ensayo de penetración por punzonamiento.
Thesis
Casas J, Calle J, Robinson V, Maranon A. (2016)
Cellular sandwich composites under blast loads
Dynamic Deformation, Damage and Fracture in Composite Materials and Structures (ISBN 978-0-08-100080-9)
Inbook
Martinez D .(2016).
DESARROLLO DE UN MODELO COMPUTACIONAL DE PREDICCION DE DA~NO DE UNA TUBERIA AFECTADA POR EL MOVIMIENTO DEL TERRENO Y ANOMALIAS INTERNAS
Thesis
Avila D .(2016).
Determination of the airy stress function from whole-field simulated stress data
Thesis
Fierro M .(2016).
Diseño conceptual de un dispositivo para el desminado humanitario en Colombia
Thesis
Zambrano J .(2016).
EFECTO DEL MATERIAL DE SOPORTE SOBRE LA PENETRACIÓN EN EL PUNZONADO EN PANELES DE KEVLAR-STF
Thesis
.(2016).
Estudio del efecto de la reducción en la dimensionalidad geométrica de las simulaciones por elementos finitos sobre la caracterización dinámica de materiales por la barra dividida de Hopkinson
Thesis
Garcia C .(2016).
Estudio y diseño estructural de piezas para blindajes opacos, bajo el impacto del proyectil de simulación de la norma “STANAG 4569”
Thesis
.(2016).
IMPACT-PENETRATION DYNAMICS: A STUDY FROM ENGINEERING MODELS PERSPECTIVE
Thesis
Buchely M, Maranon A, Silberschmidt V. V.. (2016)
Material model for modeling clay at high strain rates
International Journal of Impact Engineering (ISSN 0734-743X)
Article
Porras A, Maranon A, Ashcroft I. (2016)
Optimal tensile properties of a Manicaria-based biocomposite by the Taguchi method
Composite Structures (ISSN 0263-8223)
Article
Acosta C .(2016).
PROCEDIMIENTO DE VALIDACIÓN DE LOS PARÁMETROS DE UN MODELO CONSTITUTIVO UTILIZANDO EL ENSAYO DE TAYLOR
Thesis
.(2016).
REAL-TIME BASED PSYCHOPHYSICAL CONTRAST FUNCTION GENERATION BASED ON VISUAL EVENT-RELATED POTENTIAL APPLIED TO GREY-SCALE LCD MONITOR CALIBRATION
Thesis
Buchely M, Maranon A. (2016)
Study of steady cavitation assumptions in strain-rate-sensitive solids for rigid projectile penetrations
Acta Mechanica (ISSN 0001-5970)
Article
Porras A, Maranon A, Ashcroft I. (2016)
Thermo-mechanical characterization of Manicaria Saccifera natural fabric reinforced poly-lactic acid composite lamina
Composites Part A: Applied Science and Manufacturing (ISSN 1359-835X)
Article
Acosta C, Hernandez C, Maranon A, Casas J. (2016)
Validation of material constitutive parameters for the AISI 1010 steel from Taylor impact tests
Materials & Design (ISSN 0264-1275)
Article
Buchely M, Maranon A. (2015)
An engineering model for the penetration of a rigid-rod into a Cowper-Symonds low-strength material
Acta Mechanica (ISSN 0001-5970)
Article
Porras A, Maranon A, Ashcroft I.
Analysis of processing parameters on the mechanical behavior of Manicaria fabric/PLA bio-composite lamina by the taguchi method
Event
Bustamante E .(2015).
CARACTERIZACIÓN A ALTAS TASAS DE DEFORMACIÓN UNITARIA DE UN MATERIAL COMPUESTO DE FIBRAS NATURALES DE CABECINEGRO Y DE ÁCIDO POLILÁCTICO HACIENDO USO DE LA SPLIT HOPKINSON PRESSURE BAR
Thesis
Gomez P .(2015).
CARACTERIZACIÓN DE LA PENETRACIÓN DE UN PUNZÓN EN SISTEMAS BALÍSTICOS REFORZADOS CON STF
Thesis
Ferrer V .(2015).
CARACTERIZACIÓN DEL COMPORTAMIENTO DINÁMICO A COMPRESIÓN EN EL PLANO DE PLACAS COMPUESTAS DE PLA REFORZADAS CON FIBRA DE MANICARIA SACCIFERA
Thesis
Gomez D, Porras A, Maranon A. (2015)
Caracterización acústica del tejido natural de Manicaria Saccifera y su compuesto con PLA
CIMM2015 - VII Congreso internacional de Ingeniería Mecánica, V Congreso de Ingeniería Mecatrónica, y V Congreso de Materiales Energía y Medio Ambiente
Inproceeding
Daniel G .(2015).
Caracterización de un compuesto de PLA y Cabecinegro mediante la implementación del ensayo Split Hopkinson Pressure Bar
Thesis
Porras A, Maranon A, Ashcroft I. (2015)
Characterization of a novel natural cellulose fabric from Manicaria saccifera palm as possible reinforcement of composite materials
Composites Part B: Engineering (ISSN 1359-8368)
Article
Acosta C, Hernandez C, Maranon A. (2015)
Characterization of low carbon steel AISI 1010 used for the Stamping of steel nails from Taylor tests and inverse analysis
ASME 2015 International Mechanical Engineering Congress & Exposition
Inproceeding
Hernandez C, Maranon A, Acosta C.
Characterization of low carbon steel AISI 1010 used for the stamping of steel nails from Taylor tests and inverse analysis
Event
Buchely M, Maranon A. (2015)
Comprobación de las propiedades dinámicas de la Plastilina Roma No.1 mediante la prueba de Taylor
CIMM2015 - VII Congreso internacional de Ingeniería Mecánica, V Congreso de Ingeniería Mecatrónica, y V Congreso de Materiales Energía y Medio Ambiente
Inproceeding
Porras A .(2015).
Development and characterization of a unidirectional biocomposite lamina reinforced with a natural fabric from Manicaria Saccifera palm
Thesis
Hernandez C, Buchely M, Maranon A. (2015)
Dynamic characterization of Roma Plastilina No. 1 from Drop Test and inverse analysis
International Journal of Mechanical Sciences (ISSN 0020-7403)
Article
Penuela J .(2015).
ESTUDIO DEL EFECTO DE LA PROPAGACION DE ONDAS DE ESFUERZO UNIDIMENSIONAL PRODUCIDAS POR IMPACTO EN PANELES MULTICAPAS
Thesis
Porras A, Maranon A, Ashcroft I. (2015)
Effect of surface treatment on the mechanical properties of a bio-composite lamina from Manicaria fabric (MF) and Poly-Lactic Acid (PLA)
COMAT2015 – 6th International Conference on Science and Technology of Composite Materials
Inproceeding
.(2015).
Estudio computacional de la fragmentación de materiales frágiles con el método de partículas suavizadas (SPH)
Thesis
Porras A, Hernandez C, Maranon A.
MATERIAL COMPUESTO BIODEGRADABLE DE FIBRA NATURAL DE MANICARIA SACCIFERA Y ÁCIDO POLILÁCTICO, Y SU MÉTODO DE FABRICACIÓN
PATENTS
Diaz R .(2015).
Medición de deformaciones mediante el uso de shearografía digital en condiciones de carga específicas
Thesis
Hernandez C, Maranon A. (2015)
Métodos inversos para la caracterización mecánica de materiales a altas tasas de deformación
CIMM2015 - VII Congreso internacional de Ingeniería Mecánica, V Congreso de Ingeniería Mecatrónica, y V Congreso de Materiales Energía y Medio Ambiente
Inproceeding
Buchely M, Maranon A. (2015)
Spherical Cavity Expansion Theory for the Penetration of Finite Targets
The European Physical Journal C (ISSN 1951-6355)
Article
Buchely M, Maranon A. (2015)
Spherical Cavity Expansion Theory for the penetration of finite targets
DYMAT 2015 - 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Inproceeding
Buchely M, Maranon A. (2015)
Validation and verification methodology to calibrate the dynamic properties of soft materials using Dynamic Indentation and Taylor tests
Other Publication
Buchely M, Maranon A. (2015)
Validation and verification methodology to calibrate the dynamic properties of soft materials using Dynamic Indentation and Taylor tests
V&V ASME 2015 - Verification and Validation Symposium
Inproceeding
.(2014).
Análisis de carga cuasi-estática y fatiga en uniones adhesivas de tipo doble viga en voladizo
Thesis
Naranjo D .(2014).
CARACTERIZACIÓN DE PERFIL ESTRUCTURAL EN 'T' FABRICADO A PARTIR DE UN COMPUESTO DE PLA Y CABECINEGRO [Manicaria saccifera]
Thesis
Concha N .(2014).
COMPORTAMIENTO MECÁNICO DE PANELES FABRICADOS CON STF Y KEVLAR FRENTE AL IMPACTO DE ARMAS BLANCAS
Thesis
Chavez C .(2014).
Caracterizacion de un perfil estructural tipo I a partir de laminas de PLA y Cabecinegro
Thesis
Gomez D .(2014).
Caracterización Acústica de Cabecinegro (Manicaria Saccifera) y su compuesto con PLA.
Thesis
.(2014).
Caracterización de un material compuesto a base de ácido poliláctico (PLA) con refuerzos de fibra de cabecinegro (Manicaria Saccifera) a altas tasas de deformación unitaria en el banco de pruebas de barra dividida de Hopkinson
Thesis
.(2014).
Desarrollo de un cañón para pruebas de impacto bajo la teoría de Taylor
Thesis
.(2014).
Desempeño de paneles compuestos porosos frente a una onda de choque
Thesis
Avendaño D, Casas J, Maranon A. (2014)
Dynamic characterization ofhexagonal cell structures
Fourteenth Pan American Congress of Applied Mechanics (PACAM XIV)
Inproceeding
Porras A, Acosta C, Maranon A, Ashcroft I.
Dynamic properties of a bio-composite manufactured from Manicaria natural fabric and PolyLactic Acid under compressive loading.Mechanics of Composites Long Island, Estados Unidos USA, 8-12 June 2014
Event
Castellanos A .(2014).
ESTUDIO DE LA CORROSIÓN EN ESTADO TRANSITORIO EN OLEODUCTOS MEDIANTE EL USO DE SIMULACIONES BASADAS EN ELEMENTOS FINITOS
Thesis
.(2014).
Evaluación de una unión adhesiva ante una carga térmica variable en el tiempo
Thesis
.(2014).
INVERSE PROBLEMS FOR THE DYNAMIC CHARACTERIZATION OF MATERIALS
Thesis
.(2014).
Modelamiento de un núcleo hecho de honeycomb en una configuración tipo sandwich ante cargas explosivas
Thesis
.(2014).
Simulación por medio de elementos finitos del comportamiento de honeycombs de aluminio sometidos a compresión cuasi-estática
Thesis
Hernandez C, Maranon A, Ashcroft I, Casas J. (2013)
A computational determination of the Cowper-Symonds parameters from a single Taylor test
Applied Mathematical Modelling (ISSN 0307-904X)
Article
Buchely M, Maranon A. (2013)
A material model for plasticine at high strain rates
7th International Workshop 2013 on Dynamic behaviour of materials and its applications in industrial processes
Inproceeding
Moreno A .(2013).
ANÁLISIS DE MANUFACTURA, SELECCIÓN DE EQUIPOS Y DISEÑO CONCEPTUAL DE LA LÍNEA DE PRODUCCIÓN PARA CHALECOS ANTIBALAS CON NANOTECNOLOGÍA STF
Thesis
Porras C .(2013).
CARACTERIZACION DE LA RESPUESTA BALISTICA Y DE PENETRACION DE PANELES FLEXIBLES DE ARAMIDA REFORZADOS CON FLUIDOS DILATANTES
Thesis
Izquierdo J .(2013).
COMPROBACIÓN DEL MÉTODO DE SHEAROGRAFÍA DIGITAL Y ALGORITMOS GENÉTICOS PARA CARACTERIZACIÓN DE GRIETAS INTERNAS EN TUBERÍA DE PVC
Thesis
Acosta C .(2013).
Caracterización de la respuesta a compresión de un material compuesto de fibras naturales sometido a altas tasas de deformación unitaria, utilizando Split Hopkinson Pressure Bar
Thesis
Buchely M, Maranon A. (2013)
Caracterización de materiales a altas tasas de deformación utilizando el modelo de expansión de cavidad esférica
CIMM 2013 - VI Congreso Internacional de Ingeniería Mecánica
Inproceeding
Porras A, Maranon A. (2013)
Caracterización del tejido de fibra natural proveniente de la palma Manicaria Saccifera Gaetner
CIMM 2013 - VI Congreso Internacional de Ingeniería Mecánica
Inproceeding
Hernandez C, Maranon A. (2013)
Caracterización dinámica de Plastilina Roma mediante ensayo de caída libre y problemas inversos
CIMM2013
Inproceeding
Rojas D .(2013).
DISEÑO, MANUFACTURA Y CARACTERIZACIÓN MECÁNICA DE PERFIL ESTRUCTURAL EN “C” FABRICADO A PARTIR DE MATERIAL COMPUESTO DE PLA Y CABECINEGRO (Manicaria Saccifera)
Thesis
Porras A, Maranon A, Ashcroft I. (2013)
On the mechanical properties of a laminated composite manufactured from Manicaria fabric and PolyLactic Acid
MATCOMP2013 - 10th Conference on Composite Materials
Inproceeding
Ayala-Garcia, C., Mateus L, Maranon A, Casas J, Herran F, Velandia O, Quijano O, Rueda M.
Sistema Modular Flexible Multi Talla Para Casco De Protección Balística
PATENTS
Porras A, Maranon A, Ashcroft I. (2013)
Viscoelastic and thermal properties of PLA composite reinforced with a new natural fabric from Manicaria Saccifera Gaetner Palm
ICNF2013 - 1st International Conference on Natural Fibers
Inproceeding
Maranon A, Ayala-Garcia, C., Casas J, Perez L, Herran F, Calle J, Mateus L, Gonzalez J, Nuñez D.
Botas Antiminas De Horma Especial
PATENTS
.(2012).
Caracterización de grietas superficiales en tuberías usando shearografía digital y algoritmos genéticos
Thesis
.(2012).
Caracterización de un material compuesto de Pla con fibras del raquis de la palma de aceite (Elaeis guineensis)
Thesis
Maranon A. (2012)
Caracterización de una grieta superficial en una tubería de pvc por medio de interferometría y análisis inverso
ASME USB 2012: X Congreso Anual de Ingeniería ASME USB
Inproceeding
Ayala-Garcia, C., Maranon A, Mateus L, Casas J, Quijano O, Herran F.
Chaleco balístico ajustable portamuniciones
PATENTS
.(2012).
Desarrollo de perfiles en l a partir de fibra de carbono y resina epoxica
Thesis
Porras A, Maranon A. (2012)
Development and characterization of a laminate composite material from polylactic acid (PLA) and woven bamboo fabric
Composites Part B: Engineering (ISSN 1359-8368)
Article
Porras A, Maranon A. (2012)
Eco friendly core sandwich panel reinforced with Manicaria fiber and PLA matrix
ECCM15 - 15th European Conference on Composite Materials
Inproceeding
.(2012).
Efecto del tratamiento alcalino y explosión de vapor alcalino sobre las propiedades de la fibra de Cumare y su interface con una matriz de PLA
Thesis
Buchely M, Maranon A. (2012)
Effect of the bonding layer on ballistic performance of personal protective plate armor
ECCM15 - 15Th European Conference On Composite Materials
Inproceeding
Buchely M, Maranon A. (2012)
Engineering model for low-velocity impacts of multi-material cylinder on a rigid boundary
DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Inproceeding
Hernandez C, Maranon A, Casas J, Ashcroft I. (2012)
Inverse methods for the mechanical characterization of materials at high strain rates
DYMAT 2012 - 10th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading
Inproceeding
Buchely M, Hernandez C, Maranon A. (2012)
Material characterization and modeling of drop- test on Roma Plastilina
Article
Maranon A, Ayala-Garcia, C., Casas J, Calle J, Herran F, Mateus L, Gonzalez J, Nuñez D, Hoyos J.
Suela antiminas multifuncional
PATENTS
Maranon A. (2011)
A data correlation model for the penetration behavior of projectiles into UHMWPE composites
ICCS16 - 16th International Conference on Composite Structures
Inproceeding
Hernandez C, Maranon A, Ashcroft I, Casas J. (2011)
An inverse problem for the characterization of dynamic material model parameters from a single SHPB test
ICM11 - 11th International Conference on The Mechanical Behavior of Materials
Inproceeding
Hernandez C, Maranon A, Ashcroft I, Casas J. (2011)
An inverse problem for the characterization of dynamic material model parameters from a single SHPB test
PROCEDIA ENGINEERING (ISSN 1877-7058)
Article
Maranon A, Ayala-Garcia, C., Hernandez C, Herran F, Casas J, Quijano O, Polanco A, Mateus L, Perez L, Montaño D.
Arnés modular multipropósito para protección balística
PATENTS
Mateus L, Montes A, Maranon A. (2011)
Ballistic Perfomance of UHMWPE Hemispherical Shells
SAMPE Tech 2011
Inproceeding
.(2011).
Caracterización macromecánica de un material compuesto a base de ácido poliláctico (PLA) y fibras naturales de cumare (Astrocaryum chambira)
Thesis
.(2011).
Caracterización micromecánica interfacial de un compuesto de ácido láctico reforzado con fibras naturales de Cumare
Thesis
Maranon A, Porras A.
Characterization of Chambira (Cumare - Astrocaryum Chambira), a Colombian-amazonian natural fiber.ICCS16 - 16th International Conference on Composite Structures.POrto
Event
.(2011).
Efecto de las variables de manufactura en autoclave sobre las propiedades mecánicas de compuestos biodegradables fabricados a partir de textiles de cumare y PLA
Thesis
Maranon A. (2011)
Effect of autoclave manufacturing parameters on the mechanical properties of biodegradable Cumare - PLA composites
ICCS16 - 16th International Conference on Composite Structures
Inproceeding
Ayala-Garcia, C., Maranon A, Herran F, Casas J, Quijano O, Polanco A, Mateus L, Perez L, Montaño D, Hernandez C.
Hebilla Para Chaleco Antibalas
PATENTS
Buchely M, Maranon A. (2011)
Modelo analítico para el análisis de impacto a altas velocidades de cilindros multi-materiales
Other Publication
.(2011).
Perfiles estructurales a partir de laminados de PLA y Cabecinegro (Manicaria Saccifera)
Thesis
Ayala-Garcia, C., Maranon A, Quijano O, Mateus L, Casas J, Hernandez C, Porras A, Polanco A, Herran F, Otalora D, Llanos J, Perez L, Rueda M, Montaño D, Celemin A.
Placa De Protección Balistica Para Chalecos Antibalas Personales En Material Compuesto
PATENTS
Páez D, Porras A, Maranon A. (2011)
Pullout behavior of Chambira fiber (Colombian natural fiber) embedded in PolyLactic Acid (PLA) matrix
ICCM18 - The 18th International Conference on Composite Materials
Inproceeding
Hernandez C, Maranon A, Ashcroft I, Casas J. (2011)
Quasi-Static and Dynamic Characterization of Oil-Based Modeling Clay and Numerical Simulation of Drop-Impact Test
ASME 2011 International Mechanical Engineering Congress & Exposition
Inproceeding
Hernandez C, Maranon A, Mateus L, Ramirez A. (2011)
Simulación Numérica de Ensayos Dinámicos en el Dispositivo de Barra Hopkinson
Tercer Simposio en Mecánica de Materiales y Estructuras Continuas – SMEC 2011
Inproceeding
Maranon A, Ayala-Garcia, C., Hernandez C, Herran F, Casas J, Quijano O, Polanco A, Mateus L, Perez L, Montaño D.
Sistema de ventilación y amortiguación para chalecos antibalas
PATENTS
Maranon A, Ayala-Garcia, C., Herran F, Casas J, Quijano O, Polanco A, Mateus L, Perez L, Montaño D.
Sistema segmentado para incluir páneles balísticos solapados moviles y de rápido desajuste para chalecos antibalas
PATENTS
Hernandez C, Maranon A, Ashcroft I, Casas J. (2010)
An inverse problem for the mechanical characterization of steels from the Taylor test
IMECE2010 - ASME 2010 International Mechanical Engineering Congress & Exposition
Inproceeding
.(2010).
Aplicación de materiales compuestos para la manufactura de tubos - resina epóxica reforzada con fibras de bambú
Thesis
Montaño D, Maranon A, Polanco A. (2010)
Apparel-Oriented Anthropometric Database of Colombian Military Personnel
3DBST 2010 - 1st International Conference on 3D Body Scanning Technologies
Inproceeding
.(2010).
Caracterización del efecto del baño alcalino en propiedades: físicas, mecánicas, en la morfología, en la fractura y modos de falla de la fibra de fique
Thesis
.(2010).
Compuesto de fibra de fique reforzado con resina epóxica
Thesis
.(2010).
Cálculo de modelo de esfuerzos J-Q en grieta de reactor, a partir de un método didáctico para obtener integral de lineal J en ANSYS
Thesis
.(2010).
Desarrollo de un material compuesto de ácido poliláctico reforzado con fibra de poliéster
Thesis
Perez L, Polanco A, Maranon A. (2010)
Design Criteria for Combat Boots Based on the Evaluation and Analysis of Human Factors
3DBST 2010 - 1st International Conference on 3D Body Scanning Technologies
Inproceeding
Porras A, Maranon A, Quijano O. (2010)
Development and characterization of a laminated composite material from Polylactic Acid (PLA) and woven bamboo fabric
TEXCOMP - International Conference of Textile Composites
Inproceeding
.(2010).
Manufactura de placas curvas a partir de materiales compuestos estructurales reforzados con fibras de fique
Thesis
Hernandez C, Maranon A, Ashcroft I, Casas J. (2010)
Mechanical characterization of oil-based modeling clay from drop-test using inverse problems
19th DYMAT technical meeting
Inproceeding
.(2010).
Optimización por medio de elementos finitos de cascos militares sometidos a impactos balísticos
Thesis
.(2010).
Simulación del ensayo Kolsky utilizando ANSYS/LS-DYNA
Thesis
.(2009).
Caracterización de materiales compuestos con matriz de resina epóxica reforzada con fibras de carbono y aramida
Thesis
.(2009).
Caracterización engranajes de Novoluta, análisis por elementos finitos
Thesis
.(2009).
Computational modeling of jominy test with variable thermal properties using finite elements
Thesis
.(2009).
Desarrollo de una máquina de moldeo por transferencia de resina
Thesis
.(2009).
Detección y caracterización de grietas superficiales en tuberías por el método de interferometría
Thesis
.(2009).
Diseño y evaluación mecánica de un evaporador de película barrida para el secado de compuestos derivados de aceites vegetales usados en la producción de espumas de poliuretano
Thesis
Hormaza W, Mateus L, Maranon A. (2009)
Failure analysis of a cylinder sleeve from a turbocharged diesel engine
Engineering Failure Analysis (ISSN 1350-6307)
Article
.(2009).
Fatiga en materiales compuestos reforzados con fibra de fique
Thesis
.(2009).
Impacto de baja velocidad en dos dimensiones - modelo elasto-plástico para una viga simplemente apoyada
Thesis
.(2009).
Juntas adhesivas sometidas a fatiga en flexion
Thesis
.(2009).
Materiales compuestos - tubos en fibra de vidrio reforzados con resina poliester
Thesis
.(2009).
Pruebas mecánicas para la estandarización y caracterización del método de pull-out - prueba de extración de fibras - para materiales compuestos de resinas poliméricas reforzadas con fibras de fique
Thesis
.(2009).
Telas de fique como refuerzo para materiales compuestos
Thesis
.(2008).
Aeromodelo en materiales compuestos con cámara de video inalámbrica
Thesis
.(2008).
Caracterizacion de grietas en tuberias mediante termografia, interferometria y analisis por elementos finitos
Thesis
.(2008).
Caracterización de agujeros circulares en placas planas infinitas a partir de la teoría clásica de elasticidad
Thesis
.(2008).
Caracterización de grietas en placas planas empleando modelaje por elementos finitos y algoritmos genéticos
Thesis
Hernandez C, Maranon A. (2008)
Caracterización de un agujero en una placa a partir del campo de deformaciones usando FEM
3er. Congreso Nacional de Ingenierías Mecánica, Eléctrica, Electrónica y Mecatrónica - CIMEEM 2008.
Inproceeding
.(2008).
Caracterización de un agujero en una placa a partir del campo de deformaciones usando el método de los elementos finitos y algoritmos genéticos
Thesis
.(2008).
Caracterización y análisis de falla en juntas adhesivas bajo condiciones de fatiga por impacto
Thesis
.(2008).
Determinacion de la funcion de potencial de Airy a partir de campos de esfuerzos experimentales
Thesis
.(2008).
Diseño y fabricación de bolsa de vació en autoclave para el curado de compuestos de Kevlar
Thesis
.(2008).
Falla de compuestos reforzados con fibra de vidrio y sujetados por uniones mecánicas
Thesis
Contreras M, Hormaza W, Maranon A. (2008)
Fractografía de la fibra natural extraída del fique y de un material compuesto reforzado con tejido de fibra de fique y matriz resina poliéster
X Iberoamericano de Metalurgia y Materiales (X IBEROMET)
Inproceeding
Maranon A, Sanabria Y, Contreras M. (2008)
Impact Performance of Natural Fique-Fiber Reinforced Composites
ASME 2008 International Mechanical Engineering Congress and Exposition (IMECE2008)
Inproceeding
.(2008).
Impacto en materiales compuestos - análisis por elementos finitos
Thesis
.(2008).
Manufactura de tabla de Kitesurf en materiales compuestos - análisis, diseño y manufactura
Thesis
.(2008).
Manufacturas de paneles de Kevlar a partir de procesos de termocurado
Thesis
.(2008).
Rehabilitación, inspección e ingenieria de tanques de almacenimiento de crudo y sus derivados para la Gerencia Técnica de la Vicepresidencia de Transporte de Ecopetrol S.A - caracterización tanque 28000 bls, planta Puerto Salgar : análisis de corrosión
Thesis
.(2008).
Software application for supporting the design process with composite materials
Thesis
.(2008).
Vaina foliar de palma de coco como textil de refuerzo en compuestos con matriz de poliéster
Thesis
Mateus L, Maranon A, Hormaza W. (2007)
Analisis de falla de una camisa de un motor diesel turbocargado
8 Congreso Iberoamericano de Ingeniería Mecánica
Inproceeding
Maranon A, Hormaza W, Mateus L. (2007)
Análisis forense de un motor diesel
IV Congreso Internacional de Materiales
Inproceeding
.(2007).
Caracterización de delaminación en un material compuesto empleando modelaje por vigas de euler y algoritmos genéticos
Thesis
.(2007).
Diseño de barreras de seguridad para carreteras con materiales compuestos
Thesis
.(2007).
Diseño de una herramienta para el diseño de toboganes para parques acuáticos
Thesis
Maranon A, Ruiz P, Nurse A, Huntley J, Rivera L, Zhou G. (2007)
Identification of subsurface delaminations in composite laminates
Composites Science and Technology (ISSN 0266-3538)
Article
.(2006).
Laminado óptimo de materiales compuestos usando recocido simulado
Thesis
Pablo, Jonathan, Maranon A. (2006)
Tilt scanning interferometry: a novel technique for mapping structure and three-dimensional displacement fields within optically scattering media
Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences (ISSN 1364-5021)
Article
Maranon A, Nurse A, Huntley J. (2004)
A novel implementation of a genetic algorithm for the characterization of delamination in composite panels
International Conference on Computational Intelligence for Modelling Control and Automation - CIMCA'2004
Inproceeding
Maranon A, Huntley J, Nurse A. (2003)
Characterization of a single delamination using geometric moments and genetic algorithms
Optical Engineering (ISSN 0091-3286)
Article
Maranon A, Huntley J, Coggrave C. (2003)
Detection and sizing of delamination cracks in composite panels using speckle interferometry and genetic algorithms
Optical Measurement Systems for Industrial Inspection III (EOM01) - SPIE's Optical Metrology
Inproceeding
Maranon A, Huntley J, Coggrave C, Nurse A, Rivera L, Ruiz P, Zhou G. (2003)
Proceedings of SPIE: Optical Measurement Systems for Industrial Inspection III
Book
Maranon A, Nurse A, Huntley J. (2002)
Characterization of delamination in composite panels using invariant moments
SEM-2002
Inproceeding
Maranon A, Nurse A, Hutley J. (2002)
Quantitative determination of defect geometries in composites using ESPI data and inverse analysis
SPIE - Photon02
Inproceeding
Maranon A, Mateus L, Medina F, Soto C. (2001)
Construcción de un molino para pulverizar huesos humanos
XVIII Congreso Panamericano de Ingeniería Mecánica, Eléctrica, Industrial y ramas afines
Inproceeding
Maranon A. (1999)
Modelaje Computacional en la Industria Automotriz Colombiana
Other Publication

Degrees

  • Doctor Of Philosophy

    Doctoral degree

    Loughborough University

    2005

    Gran Bretaña

    Magíster En Ingeniería Mecánica

    Master degree

    Universidad De Los Andes, Colombia

    1996

    Colombia

  • Ingeniero Mecánico

    Bachelor degree

    Universidad De Los Andes, Colombia

    1995

    Colombia

Projects

  • 2017
    • Alimentos Con-Ciencia: Modelo sostenible de creación y diálogos inter y transdisciplinarios en torno a la producción de alimentos

      Duration: 38 months

      PR.1.2017.8127

      El proyecto Alimentos Con-Ciencia: Modelo sostenible de creación y diálogos inter y transdisciplinarios en torno a la producción de alimentos fue presentado y promovido por la Vicerrectoría de Investigación y creación para la financiación de proyectos interdisciplinarios en el 2017. El proyecto fue uno de los redireccionamientos que tuvo el trabajo adelantado por equipo de investigadores de la Universidad de los Andes, quienes participaron en el desarrollo de la propuesta que se adelantó en la Convocatoria Colombia Científica. Alimentos Con-Ciencia es un proyecto con énfasis en la creación-investigación, que busca ampliar y optimizar espacios de diálogo y de construcción colectiva alrededor de un tema de interés global, como lo son, los alimentos.A través del estudio, diseño e implementación de sistemas acuapónicos urbanos (acuicultura e hidroponía) como laboratorios agrícolas distribuidos en espacios universitarios (AgroLab), la propuesta ha demandado no sólo actos de colaboración, sino actos de creación que faciliten el desarrollo de nuevas ideas, innovadoras en los campos respectivos de trabajo inter/transdisciplinar como generador de nuevo conocimiento y significados en relación a problemas de acceso, disponibilidad, estabilidad y utilización de los alimentos vinculados a la seguridad alimentaria.Para Dobers, 2017, es claro que no existen metodologías de trabajo en conjunto que maximicen las oportunidades de colaboración y cocreación exitosas y que sean transversales a varias disciplinas en un ejercicio de experimentación, exploración y descubrimiento, en favor de la sostenibilidad futura de los sistemas agrícolas y su relación con la sociedad, la naturaleza y el paisaje, por lo tanto, este proyecto se convirtió en reto para varias disciplinas.Unidades involucradas (facultades y departamentos)Investigador principalFreddy Zapata Vanegas, Profesor Asociado.Facultad de Arquitectura y Diseño, Departamento de Diseño. Co-investigador_sFacultad de Arquitectura y Diseño. Departamento de Diseño.Maria de los Ángeles González y Samira Kadamani,  profesoras asociadasAmparo Quijano y Leonardo Parra, profesor_s asistentes. Facultad de Ingeniería.Johann Osma, profesor asociado, ingeniería eléctrica y electrónica Pablo Figueroa, profesor asociado, ingeniería de sistemas y computaciónAlejandro Marañón, profesor asociado, ingeniería mecánicaFacultad de MedicinaVeronica Akle, profesora asistente.Yeferzon Ardila, profesional asistente.Resultados esperadosEl proyecto tiene previsto los siguientes resultados:Ocho (8) talleres (cumplidos)Un (1) seminario (en proceso)Un (1) evento (en proceso)Dos (2) artículos no indexados (cumplido)Un (1) artículo indexado (en proceso)Tres (3) modelos de prueba (cumplido)Un (1) prototipo (cumplido)Un (1) registro de PI (pendiente)

  • 2012
    • DESARROLLO DEL PROYECTO INVESTIGACION

      Duration: 24 months

      PRY-609

  • 2010
    • INDUMIL - Sistema de protección balística en materiales compuestos. Etapa II

      Duration: 25 months

      PRY-490

      Fortalecimiento: Política de uso y desarrollo de los laboratorios a cargo del grupo de investigación GIE

      Duration: 5 months

      GIE_38-2010

    • Fortalecimiento: Producción de nuevo conocimiento (publicaciones ISI, artículos en conferencias internacionales, artículos en congresos internacionales e identificación de producto patentable)

      Duration: 9 months

      GIE_37-2010

  • 2009
    • Evaluación, caracterización y resistencia al desgaste abrasivo de fundiciones de hierro blanco de alto cromo tratadas térmicamente

      Duration: 12 months

      3-2009

      Detección y caracterización de grietas superficiales y subsuperficiales en tuberías

      Duration: 12 months

      57-2009

    • Determinación de la función de potencial de aire a partir de campos de esfuerzos experimentales

      Duration: 6 months

      56-2009

      Impacto sobre estructuras fabricadas en materiales compuestos

      Duration: 12 months

      58-2009

    • INDUMIL - Sistema de protección balística en materiales compuestos. Etapa I

      Duration: 16 months

      PRY-487

  • 2008
    • INDUMIL - Asesoría análisis de falla, mejoramiento resistencia de los productos al manejo y condiciones climáticas adversas

      Duration: 12 months

      PRY-372

      INDUMIL - Asesoría solución de corrosión en granadas

      Duration: 10 months

      PRY-408

      Identificar, caracterizar y formular posibles estratégias de solución, para el mecanismo de corrosión que se presenta en granadas de mano IM M-26

    • Detección y caracterización de grietas superficiales y subsuperficiales en tuberias

      Duration: 12 months

      43-2008

      Impacto sobre estructuras fabricadas en materiales compuestos

      Duration: 12 months

      60-2008

    • SDMC: Software para el soporte de diseño de materiales compuesto|

      Duration: 12 months

      44-2008

  • 2007
    • INDUMIL - Estudio para el análisis físico y aerodinámico de munición soltada MK81 (250lb) y MK82 (500lb)

      Duration: 14 months

      PRY-353

  • 2006
    • INDUMIL - Análisis aerodinámico y estructural

      Duration: 14 months

      PRY-271